Cartridge heaters
Presentation &
applications examples
CCHC : High density cartridge heaters
CCBC : Low density cartridge heaters
CCMC : Medium density cartridge heaters
Bolt heaters
RSB : Ceramic cylindrical element
MDI : Double insulation cartridge heaters
Cartridge heaters for radiators and towel dryers
Self-regulated cartridge heaters

Precautions and conditions of use

Enquire for a quotation or place an order.

 

Enquire for a quotation or place an order.


Products > Cartridge heaters > Enquire for a quotation or place an order.

 

Print version (PDF)

To place an order or for a quotation request, please fill in the form below:

Standard cartridge : Dessin d'une cartouche haute charge standard.
Standard cartridge with standard and (or) non-standard option or accessory.
Other item :

Basic information

Product code
Quantity :

Or

Cartridge diameter Ø
Length L
Wattage P Watt
Voltage T Volt
Cable length
250mm as standard without thermocouple, 1000mm with thermocouple
SL
Cartridge with thermocouple **
(standard assembly for high density cartridge heaters: TCJ2 assembly for Ø6.35 to 8 TCJ3 assembly for Ø9.52 to 20)
J  
* : Cross out non-applicable option    

** : Cartridge heaters with thermocouple do not have any ceramic head.

Then, if required, complete below additional information table :

 

Additional information, Options and Accessories

 

Additional information, if possible :

APPL Application
TEMP Operating temperature

MAT Material to be heated up
DALE Ø hole
TALE Tolerances on hole diameter  (ex : H7, +0/+0.2, etc.)
REG Temperature regulation method used PID, On/Off, thermostat, without regulation, etc.
INF1 Others (please specify):

Cartridge heater with J type thermocouple

TCJ1  At bottom of CCHC, non-insulated from the earth
TCJ2  At bottom of CCHC, insulated from the earth (standard for Ø6,35 to 8)
TCJ3  In the center of heating core, insulated from the earth (standard for Ø9,52 to 20)
TCJ4  At the center of cartridge, against tube, only available from Ø12.5
TCJX Other assembly (please specify)

Cartridge heater with K type thermocouple

TCK1  At bottom of CCHC, non-insulated from the earth
TCK2  At bottom of CCHC, insulated from the earth (standard for Ø6,35 to 8)
TCK3  In the center of heating core, insulated from the earth (standard for Ø9,52 to 20)
TCK4  At the center of cartridge, against tube, only available from Ø12.5
TCKX Other assembly (please specify)

Connection type :

SSAT  2 wires lead connection (standard connection)
SSST  Inside lead connection without head (non standard fabrication)
SRST  Outside lead connection without head (standard on demand)
XTS  Other (please specify) .  

Sealing :

CIM Refractory cement (max. temp.1000°C or 1832°F) as standard
CAF Silicon – max. temp. 280°C (536°F)
RES Epoxy resin – max. temp. 155°C (311°F) 
OBT Other sealing type (please specify)

Other specifications :

PUIV Variable wattage distribution
Please specify wattage or percentage to be added **  
XCIR Multi-circuit cartridge heater2 or 3 circuits**
XDIA Non-standard Ø  
Please specify tolerances  
XTOL Non-standard tolerances  
XSPE Other specifications (please specify)  

** please attach sketch

Supply cable complying with international standards:

NVS Standard cable – Nickel – siliconized glass fibre insulated – max. temp. 320°C (608°F)
ECS Tinned copper – silicone insulated – max. temp. 180°C (356°F)
ECSES Highly flexible tinned copper - silicone insulated – max.. temp. 180°C (356°F)
MCCS Multicore cable with copper conductors - silicone insulated – max. temp. 180°C (356°F)
NPTFE Nickel - PTFE insulated - max. temp. 260°C (500°F)
XCAB Other (please specify)

UL homologated cables :

UA Standard cable – Nickel – siliconized glass fibre insulated – max. temp. 320°C (608°F)
UE Copper – silicone insulated – max. temp. 180°C (356°F)
UG Nickel – silicone insulated – max. temp. 200°C (392°)
UL Nickel – PTFE insulated - max. temp. 200°C (392°)
XU Other (please specify)

Additional protection for cables :

1GSV 1 fibre glass sleeve on top of the 2 cables – Max. temp 250°C – Length:

mm

2GSV 1 fibre glass sleeve on top of each cable – Max. temp 250°C Length:

mm

XGSV Other (please specify)

Options :

Type Description
Opt. 0 2 wires lead connection (as standard) SL (mm)
Opt. 1
Ceramic beads on wires
LP (mm)
Opt. 2 Straight GMF (Flexible metallic conduit) LGMF (mm)
Opt. 3 Straight braid leads
 
LBraid (mm)
Opt. 3A Straight braid leads + earth wire
LBraid (mm)
Opt. 4 Straight watertight mutlicore lead w\ 2 wires + earth  wire
   
Opt. 5 Bended exit
   
Opt. 6 Bended GMF (Flexible metallic conduit)
LGMF (mm)
Opt. 7 90° exit
   
Opt. 8 90° GMF (Flexible metallic conduit)
LGMF (mm)
Opt. 9 Right angle braid leads
LBraid (mm)
Opt. 9A Right angle braid leads + earth wire

LBraid (mm)
Opt. 10 90° watertight multicore lead with 2 wires + earth  wire
   
Opt. 15 Silicone seal
   
Opt. 21 Leads at 90° from sheath
   
Opt. 22 Right angle with silicone tube
Lsilicone (mm)
Opt. 23 Angled sheath extension
A (mm)
Opt. 25 Reinforcement connection
   
Opt. 28 Right angle connection + tube + GMF (Flexible metallic conduit)
LGMF (mm)
Opt. 30 Inside lead connection without head
   
Opt XX Other option (specify) :

Accessories :

Type :   Please stipulate heating length (LC), length up to flange (LSB) or up to anchor clip
Acc.11 Treaded fitting, internal(standard assembly)  
Acc.11A Threaded fitting, internal, levelled with CCHC  
Acc.11B Other assembly LC (mm)
LSB (mm)
Acc11X Other treaded fitting (specify)
   
   
Acc.12 Threaded fitting, external  
Acc.12A Threaded fitting, external, levelled with cartridge  
Acc.12B Threaded fitting ,external, other assembly LC (mm)
  LSB (mm)
Acc12X Other threaded fitting (specify)
   
   
Acc.13 Standard mounting flange levelled with cartridge
Acc.13A Special flange mounting  
LC (mm)
Acc.13X Other flange (specify) LSB (mm)
   
Acc.14 Standard abutment    
LC (mm)
Acc.14A Special abutment mounting   LSB (mm)
Acc.14X Other abutment (specify) :  
Acc. 19A Standard anchor clip Ø6.35 to 8    
Acc.19B Standard anchor clip Ø9.52 to 11 LC (mm)
Acc.19C Standard anchor clip Ø12 to 14 LSP (mm)
Acc.19D Standard anchor clip Ø15 to 20    
Acc19X Other anchor clip
   
Acc.20A Ø4 end lead termination
Acc.20B Ø5 end lead termination
Acc.20X Other Ø end lead termination (specify)  
Acc20Y Other end lead termination type
Acc.26 Plug
Brand:
Product code:
Type :
Acc.27 Spring    
Acc. 31 Threaded fitting Type :
Acc. 32 Reinforcement cap    
Acc XX Other accessories (specify) :

Other informations :

Do not hesitate to contact our technical department to define the best solution for your requirements.

Contact information :    
First Name:  Last name : 
Company : Website :
Job title :  E-mail : 
Industry :    
Address :  City : 
Zip code :  Country : 
Phone :  Fax : 

In order to answer your inquiry, please feel in the above boxes.